Dreambox How To Install Ipkg
A pack of drivers / dependency files has surfaced to install the Omnikey to a Mipsel Dreambox. If you don't know a Mipsel dreambox is basically the Enigma2 boxes, DM7025, 800 & 8000. This method is not applicable for the older E1 boxes.
Basically the pack consists of 4 *.ipk installer files which will add the required components to the Dreambox to run the Omnikey USB reader.
Your image will most likely have the ability to install these via your manual install option in the addon panel, however to make sure everything is correct I recommend you install via Telnet and follow this guide below.
FTP the 4 IPK files to your /tmp folder on the dreambox. Then start a telnet session.
1. ipkg install /tmp/libusb_0.1.12-r0_mipsel.ipk
Code:
Installing libusb (0.1.12-r0) to root..
Configuring libusb
2. ipkg install /tmp/pcsc-lite_1.5.5-r0_mipsel.ipk
Code:
Installing pcsc-lite (1.5.5-r0) to root..
Configuring pcsc-lite
Adding system startup for /etc/init.d/pcscd ..
/etc/rc2.d/S20pcscd -> ./init.d/pcscd
/etc/rc3.d/S20pcscd -> ./init.d/pcscd
Starting PCSC Daemon: pcscd.
/etc/rc4.d/S20pcscd -> ./init.d/pcscd
/etc/rc5.d/S20pcscd -> ./init.d/pcscd
/etc/rc0.d/K20pcscd -> ./init.d/pcscd
/etc/rc1.d/K20pcscd -> ./init.d/pcscd
/etc/rc6.d/K20pcscd -> ./init.d/pcscd
3. ipkg install /tmp/libpcsclite1_1.5.5-r0_mipsel.ipk
Code:
Installing libpcsclite1 (1.5.5-r0) to root..
Configuring libpcsclite1
4. ipkg install /tmp/ccid_1.3.11-r0_mipsel.ipk
Code:
Installing ccid (1.3.11-r0) to root..
Configuring ccid
Install a dual cam to your box in this case cccam2.1.2/newcs1.67
So, once all this is in place, connect the USB reader and set it up in NewCS as normal by editing /var/tuxbox/config/newcs.xml
The reader type is
<type>pcsc</type>
The node address will be simply
<node>0</node>
If you add a second reader it will be
<node>1</node>
Now as the Omnikey is a pcsc driven reader you need to replace the newcs_167 file in /usr/bin with the one below
Newcs pcsc file
The Omnikey readers run nice and cool and allegedly calculate the card clock speed and voltage automatically from the cards ATR. Works fine with new cards.
Ferret
Livecli repacked as ipkg for E2 receiver.
- source: https://github.com/livecli/ipk
- livecli: https://github.com/livecli/livecli
This is only tested with a Vu+ Duo2
Open Dreambox Explorer or Filebrower and navigate to the ipk you want to install. Highlight it in the list press OK. Follow the prompts. Restart GUI and job is a goodun. Some images have embedded.ipk installer or if you use OpenPLi, you can put.ipk file on USB stick and put it into the receiver. Image detects file on the stick and asks you if you want to install it!
open the terminal and install ..
install required packages
download and install all required packages from this repo
test livecli
start the server
optional
if you want to use
- service 5001 gstplayer (gstreamer)
- service 5002 exteplayer3 (ffmpeg)
instead of
- service 4097 IPTV
m3u to userbouquet
convert m3u data to userbouquet data
- SEARCH
- REPLACE
Network Time Protocol (NTP)
Known issue SystemTimeWarning
SiS Accelerated Graphics Port SiS 650 SiS 651 SiS 650GX SiS M650 SiS 315315E SiS 650GL SiS 650651 SiS 650651M650M652740 Fabbricante: Asrock Silicon Integrated Systems SiS SiS. Asrock K7S41, Version 3.54, K7S41GX, 3.54. Sis 650 651 m650 m652 740 free download - SiS M650, SIS M650 Graphics Driver V6.zip, SiS SiS650/SiS740 Family Chipset Graphics Driver (Windows 2000/XP), and many more programs. SIS 650 651 M650 M652 740 DRIVERS FOR MAC DOWNLOAD - Discuss driver problems and ask for help from our community on our Free Driver Help Forum. If you are at an office or shared network, you can ask the network sis m m driver to run a scan across the network looking for misconfigured or infected devices. Or you can request a driver and we will find it for you. Sis 650 651 m650 m652 740 driver for mac windows 7. This package supports the following driver models:SiS 650 SiS 740 SiS M650 SiS 651 SiS 650740 SiS 651650740 SiS 650GL SiS 650GX SiS M650651650740.
run NTP at the startup
Bouquet Example for https://www.zdf.de/sender/zdf/zdf-live-beitrag-100.html
The basic livecli service path is
http%3a//127.0.0.1%3a53473/play/?url=
No : is allowed in an url, use %3a
Now encode the stream url with an urlencoder
https://www.zdf.de/sender/zdf/zdf-live-beitrag-100.html
changes to
https%3A%2F%2Fwww.zdf.de%2Fsender%2Fzdf%2Fzdf-live-beitrag-100.html Xforce keygen inventor 2017.
combinate the basic livecli service path and the stream url
http%3a//127.0.0.1%3a53473/play/?url=https%3A%2F%2Fwww.zdf.de%2Fsender%2Fzdf%2Fzdf-live-beitrag-100.html
with this url you can now build the valid bouquet data
create an .ipk file from the source folder.
Example for python-iso3166
Remove .pyc with find . -name '*.pyc' -delete
source of the ipkg-build file